OIL SEAL - 31-43-10.5(S)

BEARING NO 6202 The BEARING NO 6202 is a standard deep groove ball bearing widely used in various mechanical applications. Its main dimensions are: 15 mm bore diameter, 35 mm outer diameter, and 11 mm width.​ Key Features Suitable for both radial and axial loads.​ High-speed capability, with limiting speeds up to 24,000 rpm for open types and 20,000 rpm for sealed versions.​ Available in open, shielded (ZZ/2Z), and sealed (RS/2RS) variants for different environmental protection needs.​ Commonly used in electric motors, automotive components, household appliances, and industrial machinery.​ Load Ratings Dynamic load rating: approximately 8.6 kN (877 kgf).​ Static load rating: approximately 3.6 kN (360 kgf).​ Variants and Sealing 6202: Open type, suitable for clean environments. 6202 ZZ/2Z: Metal shielded, protects against dust and contaminants. 6202 RS/2RS: Rubber sealed, offers better protection against moisture and harsh conditions.​ This bearing is a reliable, versatile choice for EV components, power tools, and general industrial use, especially where durability and load capacity are critical.​ The BEARING NO 6201 The BEARING NO 6201 is a standard deep groove ball bearing commonly used in machinery, electric motors, and automotive applications. Its dimensions are 12 mm bore diameter, 32 mm outer diameter, and 10 mm width.​ Key Features Suitable for radial and light axial loads, making it versatile for various mechanical setups.​ Dynamic load rating is approximately 7.66 kN (781 kgf), and static load rating is around 3.1 kN (316 kgf).​ Limiting speed ranges from 22,000 rpm (grease lubricated) to 28,000 rpm (oil lubricated).​ Available in open, shielded (ZZ), and sealed (2RS) variants for different environmental needs.​ Typical Applications Used in electric motors, small gearboxes, household appliances, and light industrial machinery.​ Its compact size and high load capacity make it suitable for EV components, power tools, and general-purpose equipment.​ This bearing is a reliable choice for applications requiring durability and smooth operation under moderate loads and high speeds.​ BEARING NO 6204 The BEARING NO 6204 is a deep groove ball bearing widely used in industrial and automotive applications. Its standard dimensions are 20 mm bore diameter, 47 mm outer diameter, and 14 mm width.​ Key Features Suitable for both radial and light axial loads, making it versatile for various mechanical setups.​ Dynamic load rating is approximately 13.5–15.2 kN, and static load rating is about 6.5–6.7 kN.​ Limiting speed ranges from 15,000 rpm (shielded/sealed) to 18,000 rpm (open type).​ Available in open, shielded (ZZ), and sealed (2RS) variants for different environmental protection needs.​ Typical Applications Used in electric motors, pumps, gearboxes, and general industrial machinery.​ Its larger size and higher load capacity make it suitable for EV components, heavy-duty tools, and power transmission systems.​ This bearing is a robust choice for applications demanding high durability and moderate to heavy load handling, especially in EV and industrial settings.​ Oil seal 30 42 7 The OIL SEAL 30 42 7 is a metric oil seal with an inner diameter of 30 mm, outer diameter of 42 mm, and a width of 7 mm. This type of seal is commonly used in automotive, industrial, and EV applications to prevent oil leakage from shafts and housings.​ Key Features Made of nitrile rubber (NBR), suitable for a wide temperature range and resistant to oil and abrasion.​ Double lip design with a garter spring for effective sealing, keeping contaminants out and lubricant in.​ Used in gearboxes, engines, and two-wheeler components where reliable oil sealing is essential.​ Typical Applications Found in automotive and industrial machinery. Suitable for both new assembly and replacement in existing systems.​ This oil seal is a reliable option for EV and automotive maintenance, offering good sealing performance and easy installation.​ Oil seal 30 40.5 10.5 The OIL SEAL 30 40.5 10.5 is a metric oil seal with an inner diameter of 30 mm, outer diameter of 40.5 mm, and a width of 10.5 mm. It is commonly used in motorcycle and scooter front forks, shock absorbers, and various automotive or industrial shaft sealing applications.​ Key Features Made of nitrile rubber (NBR), providing good resistance to oil, abrasion, and temperature changes.​ Double lip design with a garter spring for effective sealing, preventing oil leakage and contamination.​ Suitable for use in demanding environments, including off-road and on-road vehicles.​ Typical Applications Front fork and shock absorber oil seals for motorcycles and scooters.​ Used in automotive and industrial machinery requiring reliable shaft sealing.​ This oil seal is a robust choice for EV and two-wheeler maintenance, offering durability and easy installation for critical sealing points.​ Oil seal 31 43 10.5 (s) The OIL SEAL 31 43 10.5 (s) is a metric oil seal with an inner diameter of 31 mm, outer diameter of 43 mm, and a width of 10.5 mm. It is commonly used in motorcycle and scooter front forks, shock absorbers, and other automotive or industrial shaft sealing applications.​ Key Features Made of nitrile rubber (NBR), providing resistance to oil, abrasion, and temperature variations.​ Double lip design with a garter spring for effective sealing, helping prevent oil leakage and contamination.​ Suitable for use in demanding environments such as two-wheelers, EVs, and industrial machinery.